The performance characteristics of ：
Three beam four-post type structure, optimization design by computer, simple, economic and applicable. Hydraulic control system adopts cartridge valve integrated system, reliable operation, long service life, small hydraulic impact, reduced the connecting line and the leak point. Unique electrical control system, reliable operation, intuitive, easy maintenance. With centralized control buttons, adjust (or points), single (semi-automatic) are two kinds of operating mode. Can realize fixed distance and constant pressure two molding process, and have confirmed when rolling etc. Working pressure and stroke, according to the needs of process within the prescribed scope is adjustable.
Applicable fields ：
This series machine is suitable for the metal material tensile, bending, flanging, cold extrusion, cutting process, also applies to calibration, pressure equipment, powder products, abrasive products, pressure molding and plastic products, insulation materials and forming.
Optional accessories ：
Blanking buffer device, sliding table, screen safety protection devices, oil cooling device, touch screen, a shaking device (hydraulic or mechanical), quick die clamping machine, imported PLC, with floating guide rail of the mould and rolling bracket, overhead type hydraulic system, the slider locking mechanism.
Technical parameters ：

The parameter name		unit	Four-column type hydraulic press
			Y32-40	Y32-63	Y32-100	Y32-100A	Y32-160	Y32-200	Y32-315
Nominal pressure		KN	400	630	1000	1000	1600	2000	3150
Return force		KN	150	250	320	200	320	500	600
Top of the output		KN	120	190	190	400	400	400	630
Ejector return force		KN	80	100	100	250	190	190	320
Liquid maximum working pressure		MPa	25	25	25	25	25	25	25
stroke		mm	450	400	600	600	700	700	800
Ejection stroke		mm	150	200	200	200	200	250	300
Opening height		mm	750	750	880	1000	900	1100	1250
Stroke speed	Idle downward	mm/s	160	180	120	120	100	100	100
	work	mm/s	20-25	15-20	14	14	15	15	10
	The return trip	mm/s	120	100	120	120	70	70	60
Table size	Or so	mm	580	560	720	1000	720	1000	1260
	Before and after	mm	460	500	580	800	620	900	1200
Machine dimension	Or so	mm	2000	2400	2500	2500	2700	3100	3235
	Before and after	mm	1300	1400	1500	1500	1700	1800	2060
	The ground height	mm	2600	3100	3160	3400	3400	3500	4300
The workbench high off the ground		mm	650	680	740	800	470	550	650
Motor total power		KW	5.5	7.5	7.5	7.5	11	15	22
			With growth in the cylinder

The parameter name	unit	Four-column type hydraulic press
		Y32-400	Y32-500	YG32-500C	Y32-630	Y32-800	Y32-1000	Y32-1250
Nominal pressure	KN	4000	5000	5000	6300	8000	10000	12500
Return force	KN	840	1000	1000	1250	1680	2050	2500
Top of the output	KN	630	1000	1000	1000	1600	2000	2000
Ejector return force	KN	320	450	450	450	850	1060	1060
Liquid maximum working pressure	MPa	25	25	25	25	25	25	25
stroke	mm	800	900	900	900	1000	1000	1000
Ejection stroke	mm	300	350	350	350	400	400	400
Opening height	mm	1250	1500	1500	1500	1500	1500	1500
Stroke speed	Idle downward	100	100	100	100	100	100	100
	work	6-10	10-15	10-15	6-10	12-15	10-15	6-10
	The return trip	55	70	70	60	70	70	60
Table size	Or so	1260	1400	2400	1500	1600	1600	1700
	Before and after	1200	1400	1400	1500	1600	1600	1600
Machine dimension	Or so	3235	4060	6500	4200	4800	5250	5250
	Before and after	2200	3520	3800	4200	4000	3800	3800
	The ground height	4500	4995	4740	5600	6000	6800	7000
The workbench high off the ground	mm	650	760	920	860	880	650	650
Motor total power	KW	22	22	2*22	2*22	2*37	2*37	2*37
note

Because in the continuous improvement of products, such as with the above technical data, configuration, performance characteristics and the actual data products are inconsistent, should comply with the technical agreement parameters on both sides. No further notice.