YZW79 automatic powder forming hydraulic press series

Performance and features:
This series hydraulic press is economical powder products molding equipment, has a "manual feeding, floating down, pull the demoulding" function, the machine is controlled by PLC, the pressing force and pressing line schedule may be adjusted according to the requirements of the process, and the constant pressure to complete and cheng is two kinds of process requirement. Host machine adopts three beam four-post type structure, has simple operation, reliable work, and according to the specific requirements of molding process corresponding auxiliary device to adapt to the production of complex parts. For the convenience of customers, our company according to user requirements, form a complete set of mold, mold, from press mold design and manufacturing, and even to the pressure loading a full range of technical services, personnel training so far.
Technical parameters:

The parameter name		unit	YZW79 －40	YZW79 －63	YZW79 －100	YZW79 －200	YZW79 －315	YZW79 －500	YZW79 －630
Nominal pressure		KN	400	630	1000	2000	3150	5000	6300
Liquid maximum working pressure		MPa	25	25	25	25	25	25	25
Opening height		mm	1100	1100	1200	1500	1600	2000	2250
The slider operation parameters	Most pressing force	KN	400	630	1000	2000	3150	5000	6300
	The biggest return force	KN	180	400	315	450	630	1000	1250
	The largest travel	mm	350	350	500	500	500	600	600
	Rapid downward speed	mm∕s	240	220	120	100	100	100	100
	Slow down speed	mm∕s	20	25	15	12	12	10	6
	The return rate	mm∕s	100	100	90	70	70	80	60
Ejection pistons Operation parameters	The biggest top output	KN	280	400	600/400	1000	1000	1500	1500
	Pull the dint biggest	KN	180	400	570/320	850	850	1400	1400
	The largest travel	mm	150	160	200	250	300	350	350
	Jacking speed	mm∕s	48	40	40	35	35	40	40
	Return rate	mm∕s	75	40	45	45	45	45	45
Center on the oil cylinder The piston operation parameters (optional part)	The biggest out of force	KN	30	60	60	80	80	80	80
	The biggest return force	KN	10	35	35	50	50	50	50
	The largest travel	mm	50	50	50	50	50	50	50
The center cylinder piston operation parameters (optional part)	The biggest out of force	KN	30	60	60	80	80	80	85
	The biggest return force	KN	10	35	35	50	50	50	50
	The largest travel	mm	80	120	120	150	200	200	200
Working mesa area effectively	About (x) before and after	mm×mm	500×460	600×600	700×580	900×900	1120×1120	1320×1320
					800×580	800×800	1200×800	1200×800
Side of the oil cylinder piston operation parameters (optional part)	The biggest out of force	KN	30	30	30	30	30	30	30
	The biggest return force	KN	19	19	19	19	19	19	19
	The largest travel	mm	60	60	60	80	80	100	100
Main motor power		KW	7.5	11	11	15∕22	22∕30	30	30
feeder	Before and after feeding area around (x)	mm×mm	100×110	100×110	140×150	180×200	200×200	240×260	240×260
	trip	mm	200	200	250	300	300	350	350
Machine dimensions	Or so	mm	1800	3500	3000∕3400	4200∕4000	4600∕3400	5800∕5000	5800∕5100
	Before and after	mm	2350	2500	1300∕2000	1700∕3000	2500∕3800	2500∕3800	2600∕3800
	High above the ground	mm	3200	3600	4000	4500	4800	5100	5600
	Deep under the ground	mm	300	300	300	1000	1000	1500	1860

Parameters are for reference only, specific dimension will be subject to the factory samples, if there are any changes without prior notice.